On these Chevy and GMC vehicles, Bill (a working locksmith in Arizona) cuts high-security keys on a 3D Elite and programs push-start keys with an Autel IM608.
Other makes: see all vehicle key programming videos by make.
2018 Chevy Volt: Push-Start Key Added
2018 Chevy Volt Push Start (55 sec)
Bill connects a J2534 interface and the IM608, turns the ignition on and chooses add a key. On this Volt the key slot is inside the armrest. Once programming is done, lock and unlock work and the car starts.
2017 Chevy Tahoe: High-Security Key Cut and Tested
Key cutting · 1 min
Cut on the 3D Elite, then the moment of truth in the ignition.
Bill cuts the 2017 Tahoe high-security key on the 3D Elite and tries it in the ignition. It turns.
2013 GMC Terrain: Flip Key Cut From Scratch
Key cutting · 2 min
Clean the jaw, load the blank, cut both sides.
The YouTube title says “Chevy Terrain”; in the video Bill says it’s a 2013 GMC Terrain.
On the 3D Elite: clean the jaw, load the blank, move the guide, close the lid and cut. Then clean the jaw again, flip the blank and cut side two.
Chevy Equinox: High-Security Key Cutting
Key cutting · 31 sec
A quick look at cutting an Equinox high-security key.
A short clip of a Chevy Equinox high-security key being cut with professional automotive locksmith equipment.